Technical Articles

Technical Articals written by Xenocron

Xenocron Tech Article - Q31 Burned Transistor
We get many emails that go something like this: Hey I have an OBD1 Honda ECU and I was started the car for the first time (or driving) and started to sm...
Mon, 27 Nov, 2017 at 10:08 AM
OBD1 Honda ECU Nitrous Setup Guide for Hondata S300 and Neptune
In this edition of our tech posts we will show you how to properly wire and setup a nitrous or water/methanol injection system to be used on your OBD1 Hond...
Thu, 30 Nov, 2017 at 4:15 PM
ECU Wideband Setup Guide by Xenocron
D.I.Y. Wideband Setup Guide by Xenocron This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input,...
Thu, 30 Nov, 2017 at 4:28 PM
Which VTEC Conversion Kit do I need? How to determine your OBD1 ECU Board Number
How Do I Tell Which ECU Board Number I Have for Your Various  VTEC Conversion Kits?   Open the top cover of the ECU and holding the ECU plugs on ...
Thu, 30 Nov, 2017 at 5:16 PM
PWM Boost Control Solenoid Setup Instructions for OBD1 Hondata S300 or Neptune RTP
PWM Boost Control Solenoid Setup Instructions for OBD1 Hondata S300 or Neptune RTP Install the PWM Solenoid Components to your ECU in the Following Locat...
Wed, 29 Nov, 2017 at 5:02 PM
Crome PRO Registration String Instructions
Before or After you have ordered Crome PRO from Xenocron Tuning, use these instructions to get the Registration String and Unlock the PRO features in Crome....
Tue, 16 Jan, 2018 at 9:06 AM
How To Reset Moates Ostrich
Tech Article: How to Reset your MOATES OSTRICH using TunerPRO RT Software First, goto the TunerPRO website and download TunerPRO RT http://tu...
Tue, 16 Jan, 2018 at 9:08 AM
OBSOLETE - Xenocron Serial Datalogging Cable
  RS232 Cable Instructions Solder the white 4 pin header into spots 1-4 on your ECU in the spot labeled CN2.  The cable is already pinned correctly...
Tue, 16 Jan, 2018 at 9:29 AM
OBSOLETE - Xenocron Nokia USB Cable Drivers & Install
                                                                                                                        http://ecucontrol.com/how_to_mod_my...
Tue, 16 Jan, 2018 at 9:29 AM
OBSOLETE - Xenocron USB Datalogging Cable
USB Datalogging Cable Instructions   Solder the white 4 pin header into spots 1-4 on your ECU in the spot labeled CN2.  The cable is already pinne...
Tue, 16 Jan, 2018 at 9:29 AM